Testing the water due to buying the project 4 months ago and only managed to have a look at it briefly twice.
It's a 2005 kxf250
Previously had a rebuild, new piston, timing chain, 2 valves, bearings etc
Bike started but bogged and cut out if I tried to ride.
Was believed to be carb set up with incorrect jets
I Changed the jets for std spec, and after some fiddling was a bit better But by no means right
There is oil blowing out the breather when it runs, after speaking to a few kwak mechanics and various other people they say possibly it's needing shims etc checked
The second and last time I had a look, it was a pain to start at first but bumped better, and again blew oil out the breather
So it's went away and iv never had a chance to get the cam clearances/timing etc checked
Not fussed on selling as will make time in the summer but would sell now if I can get somewhere near what I paid
Easy project for someone mechanically minded
Any questions just send a message.